Tuesday, June 28, 2016

How to Turn a Builder-Grade Vanity into a Custom and Chic Piece

Do you have a builder-grade vanity in your bathroom? A most boring, generic piece? Or one that simply doesn’t match your style or personality? If so, you might be interested in freshening things up. If replacing the entire vanity itself isn’t in the budget, however, you’ll be happy to know that you can give your old vanity a facelift and transform its ho-humness into a chic, stylish piece that really says you.

DIY Upgrade Bathroom Vanity

DIY Upgrade Bathroom Vanity - gold knobs

This isn’t a hard process. Neither is it incredibly night-and-day, depending on the old vanity that serves as your jumping-off point. But making a few subtle changes (e.g., flat-faced cabinets and drawers, fresh paint, and new tasteful hardware) will have a huge impact on the overall updated feel of your bathroom space.

DIY Upgrade Bathroom Vanity With a gold touch

DIY Level: Beginner to Intermediate

DIY Upgrade Bathroom Vanity- air strike

Materials Needed:

  • 1/4” thick MDF boards, cut to sizefor all cabinet door and drawer faces you will be re-surfacing
  • 80- and 220-grit sandpaper
  • Heavy duty Liquid Nails adhesive
  • Clamps
  • All-purpose caulk
  • Spackle
  • Brad nailer+ brads
  • Zinsser Bullseye 1-2-3 water-based primer
  • Paint of your choice
  • Hardware of your choice
  • Drill

re-facing your cabinet doors and drawers

The first step in this vanity updating process is re-facing your cabinet doors and drawers. To do this, you’ll be attaching thin MDF panels to the faces of your cabinetry. Measure the faces where it would make sense to attach. In the case of this example, measurements were taken on the cabinet and drawers right before the edges started rounding.

DIY Upgrade Bathroom Vanity- materials

Cut, or have your nice local hardware store employees cut for you, 1/4″ thick MDF boards to match these measurements.

DIY Upgrade Bathroom Vanit-cabinet doors

The thickness is up to you, of course, but if your cabinet doors and drawer fronts are already relatively thick, your best bet is to go as thin as possible for the new faces while still providing sufficient sturdiness. I found 1/4″ to be the best option for this vanity.

DIY Upgrade Bathroom Vanity-remove exsisted hardware

Remove existing hardware.

Empty out the cabinets and drawers

Empty out the cabinets and drawers, including your fantastic DIY drawer organizer. (If you haven’t made one or two of these, I strongly recommend it. Game-changer.)

DIY Upgrade Bathroom Vanity-remove all possible drawers

Remove all possible drawers. The bottom drawer in this vanity wouldn’t easily come out, so I opted to keep it in. And the top drawer under the sink is a façade drawer face, attached.

Unscrew the hinges on any cabinet doors

Unscrew the hinges on any cabinet doors, and remove these doors as well.

DIY Upgrade Bathroom Vanity-sandpaper

Grab some coarse sandpaper.

DIY Upgrade Bathroom Vanity-lightly sand faces

Lightly sand the faces of your vanity doors and drawers to scuff up the laminate a bit. This will help the glue adhere better.

DIY Upgrade Bathroom Vanity-wipe all surfaces

Wipe all surfaces after sanding.

liquid nails adhesive

Prepare your heavy duty liquid nails adhesive by cutting off the top and placing into a caulk gun.

layout on your existing door

Identify the protruding pattern or layout on your existing door and drawer faces.

Replicate this pattern

Replicate this pattern, loosely, as you apply your Liquid Nails to the rough side of the MDF board.

DIY Upgrade Bathroom Vanity-attach mdf board

Flip over and attach your MDF board to the drawer face, taking care to align it perfectly all the way around the MDF board. If there are minor imperfections in the sizing, consider the angle that will be least visible (e.g., on the bottom), and let that match-up bear the bulk of the difference. Hopefully, however, your MDF cuts will be close to perfect.

DIY Upgrade Bathroom Vanity-clamp mdf board

Clamp the MDF board onto the drawer face.

Wipe off any excess Liquid Nails

Wipe off any excess Liquid Nails that escapes. You’ll be caulking the seam, but you want it as smooth as possible to begin with.

DIY Upgrade Bathroom Vanity- continue the process

Continue this process on all the faces. Clamping is particularly critical for any faces glued on vertically. You will be using a brad nailer to secure the MDF to the faces in a bit, but I found keeping things in place and squeezing out any excess adhesive in these first few minutes to be important.

ready to secure the MDF board

After the adhesive has slightly set up during clamping, you’ll be ready to secure the MDF board to the drawer or cabinet door more permanently with the brad nailer and 5/8” nails. (These are the shortest brad nails available.)

scrap piece of MDF

Test the nailer out on a scrap piece of MDF to set the force and depth of the nailing mechanism. After you’ve set the nail force to your satisfaction (you don’t want the nail above the surface of your MDF, but you don’t want it buried deep down, either), begin nailing the MDF facades to the drawers and doors.

minor pressure adjustment

This nail was a little on the deep side and called for a minor pressure adjustment. Take care, when you’re nailing the MDF onto your doors and drawers, that you follow the footrpint of the protruding pattern on your original door and drawer faces – in other words, nail down in the same places that you used Liquid Nails. This will ensure maximum connection.

DIY Upgrade Bathroom Vanity - door and drawer

After your door and drawer faces are glued and nailed down, it’s time to caulk. This will provide a seamless look to your vanity and make it seem like the doors and drawers were built this way. All-purpose caulk is fine here.

DIY Upgrade Bathroom Vanity- caulking expert

I admit to being less than a caulking expert here, but the general idea is to run a bead of caulk down the space to be caulked.

DIY Upgrade Bathroom Vanity- dip your finger in water

Dip your finger in water to moisten it.

DIY Upgrade Bathroom Vanity - smooth mdf board

Smooth out the bead of caulk with your moistened finger. Make as few passes down a single line of caulk as possible. Avoid the temptation to go back and “fix” areas whenever possible, as this often makes the area look worse when the caulk gets tampered with. Do this to all four sides of each door and drawer where the MDF board meets the original face.

DIY Upgrade Bathroom Vanity-caulk is drying

While the caulk is drying, you can fill the nail holes with spackle.

DIY Upgrade Bathroom Vanity- smooth holes

Fill the holes and smooth out the surrounding spackle, if there is any, to decrease the need for sanding before priming and painting.

Allow caulk and spackle to dry

Allow caulk and spackle to dry thoroughly. (This is one case where I wanted to “fix” the caulk, but I recognized that if I started messing with it, it would end up looking much worse.)

DIY Upgrade Bathroom Vanity37

When caulk and spackle are completely dry, it’s time to prime. I apologize for the nonexistence of a legible primer can; this shows, however, just how much this primer is used around here. It’s Zinsser’s Bullseye 1-2-3 water-based primer (blue label), and it’s an awesome primer for use on laminate furniture.

DIY Upgrade Bathroom Vanity-priming process

Begin priming your pieces. I recommend doing the angled and non-flat edges first.

DIY Upgrade Bathroom Vanity- sides and edges

When the sides and edges are primed, use a foam roller designed specifically for doors and cabinets to coat the MDF faces with primer. Prime not just the drawers and doors that you’ve just re-faced, but also the entire vanity exterior surfaces.

DIY Upgrade Bathroom Vanity- primer applied

After the primer has been applied and dried, it’s a good idea to do a quick sanding to smooth out any imperfections. This is particularly important since you’ve just primed your first coat, and any bumps and drips at this point will only be built upon as you add more coats of primer and paint. Grab some fine-grade sandpaper (recommend 220-grit).

DIY Upgrade Bathroom Vanity- primed surfaces

Lightly sand all primed surfaces. Wipe them down, then prime a second coat. You might be tempted to skip this step, but don’t do it. This second coat is particularly important for laminate pieces, as the primer provides the critical paint-to-laminate bond.

DIY Upgrade Bathroom Vanity stain paint

After your doors, drawers, and vanity exterior have all been primed, it’s time to paint. This example uses satin finish, high quality paint, tinted to Farrow & Ball’s Strong White.

DIY Upgrade Bathroom Vanity- following the patterns

Following the pattern of applying primer, you’ll want to paint the edges and ridges first.

DIY Upgrade Bathroom Vanity- brush strokes

Brush strokes are hard to avoid on a super-flat drawer face.

DIY Upgrade Bathroom Vanity- foam roller

This is why a foam roller is ideal for a smooth, seamless finish. Roll over everywhere you can to avoid brush strokes.

DIY Upgrade Bathroom Vanity-back surface paint

When you begin to paint the vanity itself, one tip is to start at the furthest back surface and paint forward. This decreases the opportunity of leaning over your wet painted surface to reach a point further back.

DIY Upgrade Bathroom Vanity- wide

Another basic painting tip, when painting furniture with ridges and angles, is to choose the size of brush that most closely matches the surfaces you’ll be painting. A brush that’s too wide for the sides of a drawer face, for example, only leads to excess paint that will drip or run.

DIY Upgrade Bathroom Vanity- better alternative

A better alternative is to, whenever possible, opt for a brush that closely matches the paintable surface. This keeps most of the paint contained on the surface to be painted and, as a result, provides a more efficient painting method.

DIY Upgrade Bathroom Vanity- vanity sides

Use the foam roller on vanity sides as well as the door and drawer faces for the smoothest paint coat possible.

DIY Upgrade Bathroom Vanity - painting sections

After painting a section, go back in a few minutes and check for any drips. These are easiest and most effective to get rid of within five minutes, while they’re still wet. Wipe them away with the tip of your paintbrush.

DIY Upgrade Bathroom Vanity- paint dry

Let your paint dry. Gently sand with fine sandpaper. Apply one or two more coats, letting them dry thoroughly and sanding between each coat. It’s looking good, nice and fresh.

DIY Upgrade Bathroom Vanity - install new hardware

When your paint is dry, it’s time to install your new and improved hardware. These T knobs from Anthropologie have the perfect blend of vintage charm and modern simplicity for this bathroom’s style. Make sure, as you are selecting your knobs, that the thread posts are long enough to go through your added MDF façade.

DIY Upgrade Bathroom Vanity- use drill

Find the drill bit that most closely matches the knobs’ threads. I do this by holding up both the threads and the drill bit and eyeing them from the bottom, looking only at the circle sizes to compare.

DIY Upgrade Bathroom Vanity- edge of table

The following is an example of how NOT to drill a hole through MDF, although many people do it this way without knowing any better. (Don’t worry; I will give you the easy solution to this poor methodology shortly. You’ll be amazed at the difference a simple strategy makes.) In this method, you’ll line up your door or drawer to be drilled with the edge of a sturdy surface, such as a table, so that the drill hole is just off the table.

DIY Upgrade Bathroom Vanity- keeping drill

Keeping your drill bit perpendicular, drill straight through the existing hole, into and through your MDF. The goal is to create a hole in the exact center of your MDF face, using the old center hole as your guide.

DIY Upgrade Bathroom Vanity- drawers

When you flip your drawer or door over, however, you’ll likely see a worrisome sight. A chipped, peeling, or otherwise damaged drill hole might greet you. This is a problem, after you’ve worked so hard to create a smooth, flat face. MDF is particularly prone to chunking out like this when drilling.

DIY Upgrade Bathroom Vanity62

The strategy for drilling clean holes, every time, is as follows: Gather an old board that you don’t mind getting drill holes in. Lay it on the surface you’re using for supporting your door/drawer while drilling (e.g., table).

DIY Upgrade Bathroom Vanity- board to be drilled

Place the piece to be drilled face-down on top of the old board. In this case, I’ve laid the cabinet door on the old board in preparation for drilling into just the top hole. Make sure the hole to be drilled is above air, not above the table surface itself.

DIY Upgrade Bathroom Vanity- existent drawer hole

Again, using the existing hardware hole(s) as your guide, drill straight through the hole, through the MDF, and just into the old board. While you’re drilling, you want to hold the old board tight against the cabinet face so there’s no space between them. Pretend they’re just one piece.

DIY Upgrade Bathroom Vanity- clean hole

When you remove the drill bit and flip over your cabinet door, you’ll see that the hole drilled is clean-edged and perfect. This is because, as the drill pushed through the MDF, the MDF surrounding the drill bit had nowhere to “go” because the old board was there, pushing back. This method works every time for a clean drilled hole on both the back and front ends.

DIY Upgrade Bathroom Vanity- attach new hardware

Screw your new hardware into the drilled holes.

Attach the nut

Attach the nut to the threads on the inside of the drawer and tighten.

DIY Upgrade Bathroom Vanity -new knob

It’s nice when the knobs you love are a perfect fit for the new drawer faces. But what about when they aren’t?

DIY Upgrade Bathroom Vanity- knob post

If your knob thread posts are too short for the new, thicker drawer faces, here’s what you do.

DIY Upgrade Bathroom Vanity- drill spade

Attach a large spade bit to your drill. (Note: These photos show a 5/8” spade bit, but I recommend going larger, to a 1” if possible.)

DIY Upgrade Bathroom Vanity- how far the bit should go

These photos are a bird’s eye view of the drawer front, where the tan part is the inside of the drawer and the white is the drawer face. Without drilling, hold the spade bit up to the drawer face (from the inside of the drawer) to see how deep you will need to drill. This particular drawer had two pieces of particle board BEFORE the original drawer face, so it was extremely thick. I knew that I needed to get through those two particle boards with the spade bit, but not into the original face.

DIY Upgrade Bathroom Vanity- holding drill

Holding the drill perpendicular to the drawer front, and using the original hardware hole as a guide, drill a large (hopefully 1”) hole through the necessary boards. The idea here is to make a large enough hole from the inside that you can attach the knob’s nut to the threads from the inside of that large hole.

DIY Upgrade Bathroom Vanity - switch back

Switch back to your regular thread-matching drill bit, and use the original hole as your guide still to drill through the new MDF face. Don’t forget to push your old board up against the drawer face as you do this so you get a clean drill hole in front!

Considering the awkward angles

Considering the awkward angles required to drill everything perpendicular and straight in this instance while holding an old board in place, I’m pleased with the cleanliness of this drilled hole.

Threading in your knob

Begin threading in your knob. Hold the nut in place in your newly drilled larger hole with some needlenose pliers. Tighten everything as needed.

DIY Upgrade Bathroom Vanity- replace vanity drawer

Replace your vanity’s drawer and cabinet items, including your now-can’t-live-without DIY drawer organizers.

DIY Upgrade Bathroom Vanity Project

Take a step back. Wow. Look at the difference!

DIY Upgrade Bathroom Vanity- before and after

Remember what it looked like before?

DIY Upgrade Bathroom Vanity -after and before renovation

Your vanity had zero to little personality, pizzazz, or pop factor.

DIY Upgrade Bathroom Vanity -elbow

Now, thanks to a little elbow grease and some simple touches, it looks like a million bucks. A custom piece that matches your bathroom’s style flawlessly.

DIY Upgrade Bathroom Vanity -closer

A little gold hardware goes a long way.

Simple DIY Upgrade Bathroom Vanity

Congratulations! We hope you enjoy your “new” chic and customized bathroom vanity.

You’re reading How to Turn a Builder-Grade Vanity into a Custom and Chic Piece , originally posted on Homedit. If you enjoyed this post, be sure to follow Homedit on TwitterFacebook and Pinterest.


Homedit
How to Turn a Builder-Grade Vanity into a Custom and Chic Piece
#crawfordconcrete #concretecontractor #Nashvilleconcretecontractor #concrete #concreterepair @crawford_concre

The post How to Turn a Builder-Grade Vanity into a Custom and Chic Piece appeared first on Crawford Concrete | Contractor Services and Foundation Repair | Nashville, TN.

Crawford Concrete
How to Turn a Builder-Grade Vanity into a Custom and Chic Piece

The post How to Turn a Builder-Grade Vanity into a Custom and Chic Piece appeared first on Improvisation.

No comments:

Post a Comment